M42 × 1 Metric Thread Dimensions
Nominal diameter 42 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 41.35 mm. Basic minor diameter: 40.917 mm. Basic major diameter: 42 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 41.35 | 41.456 |
| Minor | 40.917 | 41.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.026 | Not specified |
| Pitch | 41.376 | 41.508 |
| Minor | 40.943 | 41.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 41.35 | 41.482 |
| Minor | 40.917 | 41.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.026 | Not specified |
| Pitch | 41.376 | 41.546 |
| Minor | 40.943 | 41.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 41.35 | 41.52 |
| Minor | 40.917 | 41.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.026 | Not specified |
| Pitch | 41.376 | 41.588 |
| Minor | 40.943 | 41.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 41.35 | 41.562 |
| Minor | 40.917 | 41.217 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.794 | 41.974 |
| Pitch | 41.199 | 41.324 |
| Root d3 | 40.583 | 40.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.794 | 41.974 |
| Pitch | 41.244 | 41.324 |
| Root d3 | 40.628 | 40.747 |
Cutting tap preparation
Pre-drill recommendation: 41 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 41.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.