M42 × 2 Metric Thread Dimensions
Nominal diameter 42 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 40.701 mm. Basic minor diameter: 39.835 mm. Basic major diameter: 42 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.701 | 40.841 |
| Minor | 39.835 | 40.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.038 | Not specified |
| Pitch | 40.739 | 40.919 |
| Minor | 39.873 | 40.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.701 | 40.881 |
| Minor | 39.835 | 40.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.038 | Not specified |
| Pitch | 40.739 | 40.963 |
| Minor | 39.873 | 40.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.701 | 40.925 |
| Minor | 39.835 | 40.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.038 | Not specified |
| Pitch | 40.739 | 41.019 |
| Minor | 39.873 | 40.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.701 | 40.981 |
| Minor | 39.835 | 40.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42.038 | Not specified |
| Pitch | 40.739 | 41.094 |
| Minor | 39.873 | 40.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 42 | Not specified |
| Pitch | 40.701 | 41.056 |
| Minor | 39.835 | 40.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.682 | 41.962 |
| Pitch | 40.493 | 40.663 |
| Root d3 | 39.261 | 39.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 41.682 | 41.962 |
| Pitch | 40.557 | 40.663 |
| Root d3 | 39.325 | 39.508 |
Cutting tap preparation
Pre-drill recommendation: 40 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 41.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.