M4.5 × 0.75 Metric Thread Dimensions
Nominal diameter 4.5 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 4.013 mm. Basic minor diameter: 3.688 mm. Basic major diameter: 4.5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.013 | 4.088 |
| Minor | 3.688 | 3.806 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.522 | Not specified |
| Pitch | 4.035 | 4.13 |
| Minor | 3.71 | 3.86 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.013 | 4.108 |
| Minor | 3.688 | 3.838 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.522 | Not specified |
| Pitch | 4.035 | 4.153 |
| Minor | 3.71 | 3.9 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.013 | 4.131 |
| Minor | 3.688 | 3.878 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.522 | Not specified |
| Pitch | 4.035 | 4.185 |
| Minor | 3.71 | 3.946 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.013 | 4.163 |
| Minor | 3.688 | 3.924 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.338 | 4.478 |
| Pitch | 3.901 | 3.991 |
| Root d3 | 3.439 | 3.558 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.338 | 4.478 |
| Pitch | 3.935 | 3.991 |
| Root d3 | 3.473 | 3.558 |
Cutting tap preparation
Pre-drill recommendation: 3.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 4.15 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.