M2.5 × 0.45 Metric Thread Dimensions
Nominal diameter 2.5 mm; pitch 0.45 mm.
Basic geometry
Basic pitch diameter: 2.208 mm. Basic minor diameter: 2.013 mm. Basic major diameter: 2.5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.5 | Not specified |
| Pitch | 2.208 | 2.268 |
| Minor | 2.013 | 2.093 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.52 | Not specified |
| Pitch | 2.228 | 2.303 |
| Minor | 2.033 | 2.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.5 | Not specified |
| Pitch | 2.208 | 2.283 |
| Minor | 2.013 | 2.113 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.52 | Not specified |
| Pitch | 2.228 | 2.323 |
| Minor | 2.033 | 2.158 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.5 | Not specified |
| Pitch | 2.208 | 2.303 |
| Minor | 2.013 | 2.138 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.38 | 2.48 |
| Pitch | 2.117 | 2.188 |
| Root d3 | 1.84 | 1.928 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.38 | 2.48 |
| Pitch | 2.143 | 2.188 |
| Root d3 | 1.866 | 1.928 |
Cutting tap preparation
Pre-drill recommendation: 2.05 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2.3 mm. Approximate formation model. Estimated formation: 65.4%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.