M4.5 × 0.5 Metric Thread Dimensions
Nominal diameter 4.5 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 4.175 mm. Basic minor diameter: 3.959 mm. Basic major diameter: 4.5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.175 | 4.238 |
| Minor | 3.959 | 4.049 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.52 | Not specified |
| Pitch | 4.195 | 4.275 |
| Minor | 3.979 | 4.091 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.175 | 4.255 |
| Minor | 3.959 | 4.071 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.52 | Not specified |
| Pitch | 4.195 | 4.295 |
| Minor | 3.979 | 4.119 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.175 | 4.275 |
| Minor | 3.959 | 4.099 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.52 | Not specified |
| Pitch | 4.195 | 4.32 |
| Minor | 3.979 | 4.159 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.5 | Not specified |
| Pitch | 4.175 | 4.3 |
| Minor | 3.959 | 4.139 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.374 | 4.48 |
| Pitch | 4.08 | 4.155 |
| Root d3 | 3.772 | 3.867 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 4.374 | 4.48 |
| Pitch | 4.107 | 4.155 |
| Root d3 | 3.799 | 3.867 |
Cutting tap preparation
Pre-drill recommendation: 4 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 4.28 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.