M2.5 × 0.35 Metric Thread Dimensions
Nominal diameter 2.5 mm; pitch 0.35 mm.
Basic geometry
Basic pitch diameter: 2.273 mm. Basic minor diameter: 2.121 mm. Basic major diameter: 2.5 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.5 | Not specified |
| Pitch | 2.273 | 2.326 |
| Minor | 2.121 | 2.184 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.519 | Not specified |
| Pitch | 2.292 | 2.359 |
| Minor | 2.14 | 2.22 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.5 | Not specified |
| Pitch | 2.273 | 2.34 |
| Minor | 2.121 | 2.201 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.519 | Not specified |
| Pitch | 2.292 | 2.377 |
| Minor | 2.14 | 2.24 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.5 | Not specified |
| Pitch | 2.273 | 2.358 |
| Minor | 2.121 | 2.221 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.396 | 2.481 |
| Pitch | 2.191 | 2.254 |
| Root d3 | 1.975 | 2.052 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 2.396 | 2.481 |
| Pitch | 2.214 | 2.254 |
| Root d3 | 1.998 | 2.052 |
Cutting tap preparation
Pre-drill recommendation: 2.15 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 2.35 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.