M38 × 1.5 Metric Thread Dimensions
Nominal diameter 38 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 37.026 mm. Basic minor diameter: 36.376 mm. Basic major diameter: 38 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38 | Not specified |
| Pitch | 37.026 | 37.151 |
| Minor | 36.376 | 36.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.032 | Not specified |
| Pitch | 37.058 | 37.218 |
| Minor | 36.408 | 36.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38 | Not specified |
| Pitch | 37.026 | 37.186 |
| Minor | 36.376 | 36.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.032 | Not specified |
| Pitch | 37.058 | 37.258 |
| Minor | 36.408 | 36.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38 | Not specified |
| Pitch | 37.026 | 37.226 |
| Minor | 36.376 | 36.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.032 | Not specified |
| Pitch | 37.058 | 37.308 |
| Minor | 36.408 | 36.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38 | Not specified |
| Pitch | 37.026 | 37.276 |
| Minor | 36.376 | 36.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38.032 | Not specified |
| Pitch | 37.058 | 37.373 |
| Minor | 36.408 | 36.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 38 | Not specified |
| Pitch | 37.026 | 37.341 |
| Minor | 36.376 | 36.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 37.732 | 37.968 |
| Pitch | 36.844 | 36.994 |
| Root d3 | 35.92 | 36.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 37.732 | 37.968 |
| Pitch | 36.899 | 36.994 |
| Root d3 | 35.975 | 36.128 |
Cutting tap preparation
Pre-drill recommendation: 36.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 37.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.