M33 × 3.5 Metric Thread Dimensions
Nominal diameter 33 mm; pitch 3.5 mm.
Basic geometry
Basic pitch diameter: 30.727 mm. Basic minor diameter: 29.211 mm. Basic major diameter: 33 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 30.727 | 30.907 |
| Minor | 29.211 | 29.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.053 | Not specified |
| Pitch | 30.78 | 31.004 |
| Minor | 29.264 | 29.714 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 30.727 | 30.951 |
| Minor | 29.211 | 29.661 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.053 | Not specified |
| Pitch | 30.78 | 31.06 |
| Minor | 29.264 | 29.824 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 30.727 | 31.007 |
| Minor | 29.211 | 29.771 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.053 | Not specified |
| Pitch | 30.78 | 31.135 |
| Minor | 29.264 | 29.974 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 30.727 | 31.082 |
| Minor | 29.211 | 29.921 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.053 | Not specified |
| Pitch | 30.78 | 31.23 |
| Minor | 29.264 | 30.164 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 30.727 | 31.177 |
| Minor | 29.211 | 30.111 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.522 | 32.947 |
| Pitch | 30.462 | 30.674 |
| Root d3 | 28.306 | 28.653 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.522 | 32.947 |
| Pitch | 30.542 | 30.674 |
| Root d3 | 28.386 | 28.653 |
Cutting tap preparation
Pre-drill recommendation: 29.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 31.5 mm. Approximate formation model. Estimated formation: 63.0%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.