M33 × 0.75 Metric Thread Dimensions
Nominal diameter 33 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 32.513 mm. Basic minor diameter: 32.188 mm. Basic major diameter: 33 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 32.513 | 32.608 |
| Minor | 32.188 | 32.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.022 | Not specified |
| Pitch | 32.535 | 32.653 |
| Minor | 32.21 | 32.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 32.513 | 32.631 |
| Minor | 32.188 | 32.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.022 | Not specified |
| Pitch | 32.535 | 32.685 |
| Minor | 32.21 | 32.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 32.513 | 32.663 |
| Minor | 32.188 | 32.378 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.838 | 32.978 |
| Pitch | 32.379 | 32.491 |
| Root d3 | 31.917 | 32.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.838 | 32.978 |
| Pitch | 32.42 | 32.491 |
| Root d3 | 31.958 | 32.058 |
Cutting tap preparation
Pre-drill recommendation: 32.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 32.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.