M33 × 2 Metric Thread Dimensions
Nominal diameter 33 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 31.701 mm. Basic minor diameter: 30.835 mm. Basic major diameter: 33 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.701 | 31.841 |
| Minor | 30.835 | 31.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.038 | Not specified |
| Pitch | 31.739 | 31.919 |
| Minor | 30.873 | 31.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.701 | 31.881 |
| Minor | 30.835 | 31.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.038 | Not specified |
| Pitch | 31.739 | 31.963 |
| Minor | 30.873 | 31.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.701 | 31.925 |
| Minor | 30.835 | 31.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.038 | Not specified |
| Pitch | 31.739 | 32.019 |
| Minor | 30.873 | 31.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.701 | 31.981 |
| Minor | 30.835 | 31.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.038 | Not specified |
| Pitch | 31.739 | 32.094 |
| Minor | 30.873 | 31.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.701 | 32.056 |
| Minor | 30.835 | 31.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.682 | 32.962 |
| Pitch | 31.493 | 31.663 |
| Root d3 | 30.261 | 30.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.682 | 32.962 |
| Pitch | 31.557 | 31.663 |
| Root d3 | 30.325 | 30.508 |
Cutting tap preparation
Pre-drill recommendation: 31 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 32.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.