M33 × 3 Metric Thread Dimensions
Nominal diameter 33 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 31.051 mm. Basic minor diameter: 29.752 mm. Basic major diameter: 33 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.051 | 31.221 |
| Minor | 29.752 | 30.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.048 | Not specified |
| Pitch | 31.099 | 31.311 |
| Minor | 29.8 | 30.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.051 | 31.263 |
| Minor | 29.752 | 30.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.048 | Not specified |
| Pitch | 31.099 | 31.364 |
| Minor | 29.8 | 30.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.051 | 31.316 |
| Minor | 29.752 | 30.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.048 | Not specified |
| Pitch | 31.099 | 31.434 |
| Minor | 29.8 | 30.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.051 | 31.386 |
| Minor | 29.752 | 30.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33.048 | Not specified |
| Pitch | 31.099 | 31.524 |
| Minor | 29.8 | 30.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 33 | Not specified |
| Pitch | 31.051 | 31.476 |
| Minor | 29.752 | 30.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.577 | 32.952 |
| Pitch | 30.803 | 31.003 |
| Root d3 | 28.955 | 29.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.577 | 32.952 |
| Pitch | 30.878 | 31.003 |
| Root d3 | 29.03 | 29.271 |
Cutting tap preparation
Pre-drill recommendation: 30 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 31.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.