M32 × 2 Metric Thread Dimensions
Nominal diameter 32 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 30.701 mm. Basic minor diameter: 29.835 mm. Basic major diameter: 32 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 30.701 | 30.841 |
| Minor | 29.835 | 30.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.038 | Not specified |
| Pitch | 30.739 | 30.919 |
| Minor | 29.873 | 30.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 30.701 | 30.881 |
| Minor | 29.835 | 30.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.038 | Not specified |
| Pitch | 30.739 | 30.963 |
| Minor | 29.873 | 30.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 30.701 | 30.925 |
| Minor | 29.835 | 30.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.038 | Not specified |
| Pitch | 30.739 | 31.019 |
| Minor | 29.873 | 30.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 30.701 | 30.981 |
| Minor | 29.835 | 30.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.038 | Not specified |
| Pitch | 30.739 | 31.094 |
| Minor | 29.873 | 30.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 30.701 | 31.056 |
| Minor | 29.835 | 30.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 31.682 | 31.962 |
| Pitch | 30.493 | 30.663 |
| Root d3 | 29.261 | 29.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 31.682 | 31.962 |
| Pitch | 30.557 | 30.663 |
| Root d3 | 29.325 | 29.508 |
Cutting tap preparation
Pre-drill recommendation: 30 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 31.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.