M32 × 1.5 Metric Thread Dimensions
Nominal diameter 32 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 31.026 mm. Basic minor diameter: 30.376 mm. Basic major diameter: 32 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 31.026 | 31.151 |
| Minor | 30.376 | 30.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.032 | Not specified |
| Pitch | 31.058 | 31.218 |
| Minor | 30.408 | 30.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 31.026 | 31.186 |
| Minor | 30.376 | 30.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.032 | Not specified |
| Pitch | 31.058 | 31.258 |
| Minor | 30.408 | 30.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 31.026 | 31.226 |
| Minor | 30.376 | 30.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.032 | Not specified |
| Pitch | 31.058 | 31.308 |
| Minor | 30.408 | 30.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 31.026 | 31.276 |
| Minor | 30.376 | 30.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32.032 | Not specified |
| Pitch | 31.058 | 31.373 |
| Minor | 30.408 | 30.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 32 | Not specified |
| Pitch | 31.026 | 31.341 |
| Minor | 30.376 | 30.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 31.732 | 31.968 |
| Pitch | 30.844 | 30.994 |
| Root d3 | 29.92 | 30.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 31.732 | 31.968 |
| Pitch | 30.899 | 30.994 |
| Root d3 | 29.975 | 30.128 |
Cutting tap preparation
Pre-drill recommendation: 30.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 31.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.