M280 × 8 Metric Thread Dimensions
Nominal diameter 280 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 274.804 mm. Basic minor diameter: 271.34 mm. Basic major diameter: 280 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 274.804 | 275.104 |
| Minor | 271.34 | 271.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.1 | Not specified |
| Pitch | 274.904 | 275.279 |
| Minor | 271.44 | 272.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 274.804 | 275.179 |
| Minor | 271.34 | 272.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.1 | Not specified |
| Pitch | 274.904 | 275.379 |
| Minor | 271.44 | 272.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 274.804 | 275.279 |
| Minor | 271.34 | 272.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.1 | Not specified |
| Pitch | 274.904 | 275.504 |
| Minor | 271.44 | 272.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 274.804 | 275.404 |
| Minor | 271.34 | 272.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.1 | Not specified |
| Pitch | 274.904 | 275.654 |
| Minor | 271.44 | 273.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 274.804 | 275.554 |
| Minor | 271.34 | 272.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.19 | 279.9 |
| Pitch | 274.349 | 274.704 |
| Root d3 | 269.421 | 270.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.19 | 279.9 |
| Pitch | 274.48 | 274.704 |
| Root d3 | 269.552 | 270.085 |
Cutting tap preparation
Pre-drill recommendation: 272 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 276.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.