M280 × 6 Metric Thread Dimensions
Nominal diameter 280 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 276.103 mm. Basic minor diameter: 273.505 mm. Basic major diameter: 280 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 276.103 | 276.368 |
| Minor | 273.505 | 274.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.08 | Not specified |
| Pitch | 276.183 | 276.518 |
| Minor | 273.585 | 274.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 276.103 | 276.438 |
| Minor | 273.505 | 274.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.08 | Not specified |
| Pitch | 276.183 | 276.608 |
| Minor | 273.585 | 274.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 276.103 | 276.528 |
| Minor | 273.505 | 274.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.08 | Not specified |
| Pitch | 276.183 | 276.713 |
| Minor | 273.585 | 274.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 276.103 | 276.633 |
| Minor | 273.505 | 274.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.08 | Not specified |
| Pitch | 276.183 | 276.853 |
| Minor | 273.585 | 274.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 276.103 | 276.773 |
| Minor | 273.505 | 274.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.32 | 279.92 |
| Pitch | 275.708 | 276.023 |
| Root d3 | 272.012 | 272.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.32 | 279.92 |
| Pitch | 275.823 | 276.023 |
| Root d3 | 272.127 | 272.559 |
Cutting tap preparation
Pre-drill recommendation: 274 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 277.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.