M280 × 4 Metric Thread Dimensions
Nominal diameter 280 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 277.402 mm. Basic minor diameter: 275.67 mm. Basic major diameter: 280 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 277.402 | 277.638 |
| Minor | 275.67 | 276.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.06 | Not specified |
| Pitch | 277.462 | 277.762 |
| Minor | 275.73 | 276.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 277.402 | 277.702 |
| Minor | 275.67 | 276.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.06 | Not specified |
| Pitch | 277.462 | 277.837 |
| Minor | 275.73 | 276.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 277.402 | 277.777 |
| Minor | 275.67 | 276.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.06 | Not specified |
| Pitch | 277.462 | 277.937 |
| Minor | 275.73 | 276.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 277.402 | 277.877 |
| Minor | 275.67 | 276.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.06 | Not specified |
| Pitch | 277.462 | 278.062 |
| Minor | 275.73 | 276.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 277.402 | 278.002 |
| Minor | 275.67 | 276.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.465 | 279.94 |
| Pitch | 277.062 | 277.342 |
| Root d3 | 274.598 | 275.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.465 | 279.94 |
| Pitch | 277.162 | 277.342 |
| Root d3 | 274.698 | 275.033 |
Cutting tap preparation
Pre-drill recommendation: 276 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 278.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.