M280 × 3 Metric Thread Dimensions
Nominal diameter 280 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 278.051 mm. Basic minor diameter: 276.752 mm. Basic major diameter: 280 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 278.051 | 278.263 |
| Minor | 276.752 | 277.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.048 | Not specified |
| Pitch | 278.099 | 278.364 |
| Minor | 276.8 | 277.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 278.051 | 278.316 |
| Minor | 276.752 | 277.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.048 | Not specified |
| Pitch | 278.099 | 278.434 |
| Minor | 276.8 | 277.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 278.051 | 278.386 |
| Minor | 276.752 | 277.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.048 | Not specified |
| Pitch | 278.099 | 278.524 |
| Minor | 276.8 | 277.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 278.051 | 278.476 |
| Minor | 276.752 | 277.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280.048 | Not specified |
| Pitch | 278.099 | 278.629 |
| Minor | 276.8 | 277.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 280 | Not specified |
| Pitch | 278.051 | 278.581 |
| Minor | 276.752 | 277.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.577 | 279.952 |
| Pitch | 277.753 | 278.003 |
| Root d3 | 275.905 | 276.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 279.577 | 279.952 |
| Pitch | 277.843 | 278.003 |
| Root d3 | 275.995 | 276.271 |
Cutting tap preparation
Pre-drill recommendation: 277 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 278.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.