M260 × 8 Metric Thread Dimensions
Nominal diameter 260 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 254.804 mm. Basic minor diameter: 251.34 mm. Basic major diameter: 260 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 254.804 | 255.104 |
| Minor | 251.34 | 251.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.1 | Not specified |
| Pitch | 254.904 | 255.279 |
| Minor | 251.44 | 252.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 254.804 | 255.179 |
| Minor | 251.34 | 252.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.1 | Not specified |
| Pitch | 254.904 | 255.379 |
| Minor | 251.44 | 252.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 254.804 | 255.279 |
| Minor | 251.34 | 252.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.1 | Not specified |
| Pitch | 254.904 | 255.504 |
| Minor | 251.44 | 252.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 254.804 | 255.404 |
| Minor | 251.34 | 252.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.1 | Not specified |
| Pitch | 254.904 | 255.654 |
| Minor | 251.44 | 253.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 254.804 | 255.554 |
| Minor | 251.34 | 252.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.19 | 259.9 |
| Pitch | 254.349 | 254.704 |
| Root d3 | 249.421 | 250.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.19 | 259.9 |
| Pitch | 254.48 | 254.704 |
| Root d3 | 249.552 | 250.085 |
Cutting tap preparation
Pre-drill recommendation: 252 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 256.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.