M260 × 4 Metric Thread Dimensions
Nominal diameter 260 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 257.402 mm. Basic minor diameter: 255.67 mm. Basic major diameter: 260 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 257.402 | 257.638 |
| Minor | 255.67 | 256.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.06 | Not specified |
| Pitch | 257.462 | 257.762 |
| Minor | 255.73 | 256.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 257.402 | 257.702 |
| Minor | 255.67 | 256.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.06 | Not specified |
| Pitch | 257.462 | 257.837 |
| Minor | 255.73 | 256.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 257.402 | 257.777 |
| Minor | 255.67 | 256.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.06 | Not specified |
| Pitch | 257.462 | 257.937 |
| Minor | 255.73 | 256.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 257.402 | 257.877 |
| Minor | 255.67 | 256.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.06 | Not specified |
| Pitch | 257.462 | 258.062 |
| Minor | 255.73 | 256.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 257.402 | 258.002 |
| Minor | 255.67 | 256.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.465 | 259.94 |
| Pitch | 257.062 | 257.342 |
| Root d3 | 254.598 | 255.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.465 | 259.94 |
| Pitch | 257.162 | 257.342 |
| Root d3 | 254.698 | 255.033 |
Cutting tap preparation
Pre-drill recommendation: 256 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 258.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.