M260 × 6 Metric Thread Dimensions
Nominal diameter 260 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 256.103 mm. Basic minor diameter: 253.505 mm. Basic major diameter: 260 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 256.103 | 256.368 |
| Minor | 253.505 | 254.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.08 | Not specified |
| Pitch | 256.183 | 256.518 |
| Minor | 253.585 | 254.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 256.103 | 256.438 |
| Minor | 253.505 | 254.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.08 | Not specified |
| Pitch | 256.183 | 256.608 |
| Minor | 253.585 | 254.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 256.103 | 256.528 |
| Minor | 253.505 | 254.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.08 | Not specified |
| Pitch | 256.183 | 256.713 |
| Minor | 253.585 | 254.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 256.103 | 256.633 |
| Minor | 253.505 | 254.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.08 | Not specified |
| Pitch | 256.183 | 256.853 |
| Minor | 253.585 | 254.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 256.103 | 256.773 |
| Minor | 253.505 | 254.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.32 | 259.92 |
| Pitch | 255.708 | 256.023 |
| Root d3 | 252.012 | 252.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.32 | 259.92 |
| Pitch | 255.823 | 256.023 |
| Root d3 | 252.127 | 252.559 |
Cutting tap preparation
Pre-drill recommendation: 254 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 257.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.