M260 × 3 Metric Thread Dimensions
Nominal diameter 260 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 258.051 mm. Basic minor diameter: 256.752 mm. Basic major diameter: 260 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 258.051 | 258.263 |
| Minor | 256.752 | 257.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.048 | Not specified |
| Pitch | 258.099 | 258.364 |
| Minor | 256.8 | 257.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 258.051 | 258.316 |
| Minor | 256.752 | 257.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.048 | Not specified |
| Pitch | 258.099 | 258.434 |
| Minor | 256.8 | 257.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 258.051 | 258.386 |
| Minor | 256.752 | 257.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.048 | Not specified |
| Pitch | 258.099 | 258.524 |
| Minor | 256.8 | 257.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 258.051 | 258.476 |
| Minor | 256.752 | 257.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260.048 | Not specified |
| Pitch | 258.099 | 258.629 |
| Minor | 256.8 | 257.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 260 | Not specified |
| Pitch | 258.051 | 258.581 |
| Minor | 256.752 | 257.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.577 | 259.952 |
| Pitch | 257.753 | 258.003 |
| Root d3 | 255.905 | 256.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 259.577 | 259.952 |
| Pitch | 257.843 | 258.003 |
| Root d3 | 255.995 | 256.271 |
Cutting tap preparation
Pre-drill recommendation: 257 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 258.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.