M230 × 6 Metric Thread Dimensions
Nominal diameter 230 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 226.103 mm. Basic minor diameter: 223.505 mm. Basic major diameter: 230 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 226.103 | 226.368 |
| Minor | 223.505 | 224.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.08 | Not specified |
| Pitch | 226.183 | 226.518 |
| Minor | 223.585 | 224.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 226.103 | 226.438 |
| Minor | 223.505 | 224.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.08 | Not specified |
| Pitch | 226.183 | 226.608 |
| Minor | 223.585 | 224.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 226.103 | 226.528 |
| Minor | 223.505 | 224.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.08 | Not specified |
| Pitch | 226.183 | 226.713 |
| Minor | 223.585 | 224.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 226.103 | 226.633 |
| Minor | 223.505 | 224.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.08 | Not specified |
| Pitch | 226.183 | 226.853 |
| Minor | 223.585 | 224.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 226.103 | 226.773 |
| Minor | 223.505 | 224.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.32 | 229.92 |
| Pitch | 225.708 | 226.023 |
| Root d3 | 222.012 | 222.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.32 | 229.92 |
| Pitch | 225.823 | 226.023 |
| Root d3 | 222.127 | 222.559 |
Cutting tap preparation
Pre-drill recommendation: 224 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 227.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.