M230 × 2 Metric Thread Dimensions
Nominal diameter 230 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 228.701 mm. Basic minor diameter: 227.835 mm. Basic major diameter: 230 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.701 | 228.881 |
| Minor | 227.835 | 228.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.038 | Not specified |
| Pitch | 228.739 | 228.963 |
| Minor | 227.873 | 228.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.701 | 228.925 |
| Minor | 227.835 | 228.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.038 | Not specified |
| Pitch | 228.739 | 229.019 |
| Minor | 227.873 | 228.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.701 | 228.981 |
| Minor | 227.835 | 228.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.038 | Not specified |
| Pitch | 228.739 | 229.094 |
| Minor | 227.873 | 228.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.701 | 229.056 |
| Minor | 227.835 | 228.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.038 | Not specified |
| Pitch | 228.739 | 229.189 |
| Minor | 227.873 | 228.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.701 | 229.151 |
| Minor | 227.835 | 228.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.682 | 229.962 |
| Pitch | 228.451 | 228.663 |
| Root d3 | 227.219 | 227.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.682 | 229.962 |
| Pitch | 228.531 | 228.663 |
| Root d3 | 227.299 | 227.508 |
Cutting tap preparation
Pre-drill recommendation: 228 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 229.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.