M230 × 3 Metric Thread Dimensions
Nominal diameter 230 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 228.051 mm. Basic minor diameter: 226.752 mm. Basic major diameter: 230 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.051 | 228.263 |
| Minor | 226.752 | 227.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.048 | Not specified |
| Pitch | 228.099 | 228.364 |
| Minor | 226.8 | 227.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.051 | 228.316 |
| Minor | 226.752 | 227.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.048 | Not specified |
| Pitch | 228.099 | 228.434 |
| Minor | 226.8 | 227.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.051 | 228.386 |
| Minor | 226.752 | 227.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.048 | Not specified |
| Pitch | 228.099 | 228.524 |
| Minor | 226.8 | 227.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.051 | 228.476 |
| Minor | 226.752 | 227.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.048 | Not specified |
| Pitch | 228.099 | 228.629 |
| Minor | 226.8 | 227.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 228.051 | 228.581 |
| Minor | 226.752 | 227.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.577 | 229.952 |
| Pitch | 227.753 | 228.003 |
| Root d3 | 225.905 | 226.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.577 | 229.952 |
| Pitch | 227.843 | 228.003 |
| Root d3 | 225.995 | 226.271 |
Cutting tap preparation
Pre-drill recommendation: 227 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 228.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.