M230 × 4 Metric Thread Dimensions
Nominal diameter 230 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 227.402 mm. Basic minor diameter: 225.67 mm. Basic major diameter: 230 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 227.402 | 227.638 |
| Minor | 225.67 | 226.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.06 | Not specified |
| Pitch | 227.462 | 227.762 |
| Minor | 225.73 | 226.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 227.402 | 227.702 |
| Minor | 225.67 | 226.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.06 | Not specified |
| Pitch | 227.462 | 227.837 |
| Minor | 225.73 | 226.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 227.402 | 227.777 |
| Minor | 225.67 | 226.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.06 | Not specified |
| Pitch | 227.462 | 227.937 |
| Minor | 225.73 | 226.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 227.402 | 227.877 |
| Minor | 225.67 | 226.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230.06 | Not specified |
| Pitch | 227.462 | 228.062 |
| Minor | 225.73 | 226.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 230 | Not specified |
| Pitch | 227.402 | 228.002 |
| Minor | 225.67 | 226.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.465 | 229.94 |
| Pitch | 227.062 | 227.342 |
| Root d3 | 224.598 | 225.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 229.465 | 229.94 |
| Pitch | 227.162 | 227.342 |
| Root d3 | 224.698 | 225.033 |
Cutting tap preparation
Pre-drill recommendation: 226 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 228.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.