M22 × 3 Metric Thread Dimensions
Nominal diameter 22 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 20.051 mm. Basic minor diameter: 18.752 mm. Basic major diameter: 22 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.051 | 20.201 |
| Minor | 18.752 | 19.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.048 | Not specified |
| Pitch | 20.099 | 20.289 |
| Minor | 18.8 | 19.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.051 | 20.241 |
| Minor | 18.752 | 19.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.048 | Not specified |
| Pitch | 20.099 | 20.335 |
| Minor | 18.8 | 19.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.051 | 20.287 |
| Minor | 18.752 | 19.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.048 | Not specified |
| Pitch | 20.099 | 20.399 |
| Minor | 18.8 | 19.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.051 | 20.351 |
| Minor | 18.752 | 19.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.048 | Not specified |
| Pitch | 20.099 | 20.474 |
| Minor | 18.8 | 19.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.051 | 20.426 |
| Minor | 18.752 | 19.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.577 | 21.952 |
| Pitch | 19.823 | 20.003 |
| Root d3 | 17.975 | 18.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.577 | 21.952 |
| Pitch | 19.891 | 20.003 |
| Root d3 | 18.043 | 18.271 |
Cutting tap preparation
Pre-drill recommendation: 19 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 20.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.