M22 × 2.5 Metric Thread Dimensions
Nominal diameter 22 mm; pitch 2.5 mm.
Basic geometry
Basic pitch diameter: 20.376 mm. Basic minor diameter: 19.294 mm. Basic major diameter: 22 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.376 | 20.516 |
| Minor | 19.294 | 19.574 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.042 | Not specified |
| Pitch | 20.418 | 20.598 |
| Minor | 19.336 | 19.691 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.376 | 20.556 |
| Minor | 19.294 | 19.649 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.042 | Not specified |
| Pitch | 20.418 | 20.642 |
| Minor | 19.336 | 19.786 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.376 | 20.6 |
| Minor | 19.294 | 19.744 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.042 | Not specified |
| Pitch | 20.418 | 20.698 |
| Minor | 19.336 | 19.896 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.376 | 20.656 |
| Minor | 19.294 | 19.854 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.042 | Not specified |
| Pitch | 20.418 | 20.773 |
| Minor | 19.336 | 20.046 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 20.376 | 20.731 |
| Minor | 19.294 | 20.004 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.623 | 21.958 |
| Pitch | 20.164 | 20.334 |
| Root d3 | 18.624 | 18.891 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.623 | 21.958 |
| Pitch | 20.228 | 20.334 |
| Root d3 | 18.688 | 18.891 |
Cutting tap preparation
Pre-drill recommendation: 19.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 20.9 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.