M22 × 0.75 Metric Thread Dimensions
Nominal diameter 22 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 21.513 mm. Basic minor diameter: 21.188 mm. Basic major diameter: 22 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.513 | 21.603 |
| Minor | 21.188 | 21.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.022 | Not specified |
| Pitch | 21.535 | 21.647 |
| Minor | 21.21 | 21.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.513 | 21.625 |
| Minor | 21.188 | 21.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.022 | Not specified |
| Pitch | 21.535 | 21.675 |
| Minor | 21.21 | 21.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.513 | 21.653 |
| Minor | 21.188 | 21.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.022 | Not specified |
| Pitch | 21.535 | 21.715 |
| Minor | 21.21 | 21.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.513 | 21.693 |
| Minor | 21.188 | 21.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.838 | 21.978 |
| Pitch | 21.385 | 21.491 |
| Root d3 | 20.923 | 21.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.838 | 21.978 |
| Pitch | 21.424 | 21.491 |
| Root d3 | 20.962 | 21.058 |
Cutting tap preparation
Pre-drill recommendation: 21.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 21.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.