M22 × 0.5 Metric Thread Dimensions
Nominal diameter 22 mm; pitch 0.5 mm.
Basic geometry
Basic pitch diameter: 21.675 mm. Basic minor diameter: 21.459 mm. Basic major diameter: 22 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.675 | 21.75 |
| Minor | 21.459 | 21.549 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.02 | Not specified |
| Pitch | 21.695 | 21.79 |
| Minor | 21.479 | 21.591 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.675 | 21.77 |
| Minor | 21.459 | 21.571 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22.02 | Not specified |
| Pitch | 21.695 | 21.813 |
| Minor | 21.479 | 21.619 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 22 | Not specified |
| Pitch | 21.675 | 21.793 |
| Minor | 21.459 | 21.599 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.874 | 21.98 |
| Pitch | 21.565 | 21.655 |
| Root d3 | 21.257 | 21.367 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 21.874 | 21.98 |
| Pitch | 21.599 | 21.655 |
| Root d3 | 21.291 | 21.367 |
Cutting tap preparation
Pre-drill recommendation: 21.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 21.78 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.