M225 × 6 Metric Thread Dimensions
Nominal diameter 225 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 221.103 mm. Basic minor diameter: 218.505 mm. Basic major diameter: 225 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 221.103 | 221.368 |
| Minor | 218.505 | 219.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.08 | Not specified |
| Pitch | 221.183 | 221.518 |
| Minor | 218.585 | 219.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 221.103 | 221.438 |
| Minor | 218.505 | 219.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.08 | Not specified |
| Pitch | 221.183 | 221.608 |
| Minor | 218.585 | 219.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 221.103 | 221.528 |
| Minor | 218.505 | 219.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.08 | Not specified |
| Pitch | 221.183 | 221.713 |
| Minor | 218.585 | 219.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 221.103 | 221.633 |
| Minor | 218.505 | 219.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.08 | Not specified |
| Pitch | 221.183 | 221.853 |
| Minor | 218.585 | 219.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 221.103 | 221.773 |
| Minor | 218.505 | 219.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.32 | 224.92 |
| Pitch | 220.708 | 221.023 |
| Root d3 | 217.012 | 217.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.32 | 224.92 |
| Pitch | 220.823 | 221.023 |
| Root d3 | 217.127 | 217.559 |
Cutting tap preparation
Pre-drill recommendation: 219 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 222.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.