M225 × 2 Metric Thread Dimensions
Nominal diameter 225 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 223.701 mm. Basic minor diameter: 222.835 mm. Basic major diameter: 225 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.701 | 223.881 |
| Minor | 222.835 | 223.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.038 | Not specified |
| Pitch | 223.739 | 223.963 |
| Minor | 222.873 | 223.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.701 | 223.925 |
| Minor | 222.835 | 223.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.038 | Not specified |
| Pitch | 223.739 | 224.019 |
| Minor | 222.873 | 223.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.701 | 223.981 |
| Minor | 222.835 | 223.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.038 | Not specified |
| Pitch | 223.739 | 224.094 |
| Minor | 222.873 | 223.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.701 | 224.056 |
| Minor | 222.835 | 223.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.038 | Not specified |
| Pitch | 223.739 | 224.189 |
| Minor | 222.873 | 223.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.701 | 224.151 |
| Minor | 222.835 | 223.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.682 | 224.962 |
| Pitch | 223.451 | 223.663 |
| Root d3 | 222.219 | 222.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.682 | 224.962 |
| Pitch | 223.531 | 223.663 |
| Root d3 | 222.299 | 222.508 |
Cutting tap preparation
Pre-drill recommendation: 223 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 224.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.