M225 × 3 Metric Thread Dimensions
Nominal diameter 225 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 223.051 mm. Basic minor diameter: 221.752 mm. Basic major diameter: 225 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.051 | 223.263 |
| Minor | 221.752 | 222.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.048 | Not specified |
| Pitch | 223.099 | 223.364 |
| Minor | 221.8 | 222.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.051 | 223.316 |
| Minor | 221.752 | 222.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.048 | Not specified |
| Pitch | 223.099 | 223.434 |
| Minor | 221.8 | 222.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.051 | 223.386 |
| Minor | 221.752 | 222.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.048 | Not specified |
| Pitch | 223.099 | 223.524 |
| Minor | 221.8 | 222.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.051 | 223.476 |
| Minor | 221.752 | 222.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.048 | Not specified |
| Pitch | 223.099 | 223.629 |
| Minor | 221.8 | 222.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 223.051 | 223.581 |
| Minor | 221.752 | 222.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.577 | 224.952 |
| Pitch | 222.753 | 223.003 |
| Root d3 | 220.905 | 221.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.577 | 224.952 |
| Pitch | 222.843 | 223.003 |
| Root d3 | 220.995 | 221.271 |
Cutting tap preparation
Pre-drill recommendation: 222 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 223.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.