M225 × 4 Metric Thread Dimensions
Nominal diameter 225 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 222.402 mm. Basic minor diameter: 220.67 mm. Basic major diameter: 225 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 222.402 | 222.638 |
| Minor | 220.67 | 221.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.06 | Not specified |
| Pitch | 222.462 | 222.762 |
| Minor | 220.73 | 221.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 222.402 | 222.702 |
| Minor | 220.67 | 221.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.06 | Not specified |
| Pitch | 222.462 | 222.837 |
| Minor | 220.73 | 221.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 222.402 | 222.777 |
| Minor | 220.67 | 221.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.06 | Not specified |
| Pitch | 222.462 | 222.937 |
| Minor | 220.73 | 221.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 222.402 | 222.877 |
| Minor | 220.67 | 221.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225.06 | Not specified |
| Pitch | 222.462 | 223.062 |
| Minor | 220.73 | 221.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 225 | Not specified |
| Pitch | 222.402 | 223.002 |
| Minor | 220.67 | 221.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.465 | 224.94 |
| Pitch | 222.062 | 222.342 |
| Root d3 | 219.598 | 220.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 224.465 | 224.94 |
| Pitch | 222.162 | 222.342 |
| Root d3 | 219.698 | 220.033 |
Cutting tap preparation
Pre-drill recommendation: 221 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 223.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.