M220 × 8 Metric Thread Dimensions
Nominal diameter 220 mm; pitch 8 mm.
Basic geometry
Basic pitch diameter: 214.804 mm. Basic minor diameter: 211.34 mm. Basic major diameter: 220 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 214.804 | 215.104 |
| Minor | 211.34 | 211.97 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.1 | Not specified |
| Pitch | 214.904 | 215.279 |
| Minor | 211.44 | 212.24 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 214.804 | 215.179 |
| Minor | 211.34 | 212.14 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.1 | Not specified |
| Pitch | 214.904 | 215.379 |
| Minor | 211.44 | 212.44 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 214.804 | 215.279 |
| Minor | 211.34 | 212.34 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.1 | Not specified |
| Pitch | 214.904 | 215.504 |
| Minor | 211.44 | 212.69 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 214.804 | 215.404 |
| Minor | 211.34 | 212.59 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.1 | Not specified |
| Pitch | 214.904 | 215.654 |
| Minor | 211.44 | 213.04 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 214.804 | 215.554 |
| Minor | 211.34 | 212.94 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.19 | 219.9 |
| Pitch | 214.349 | 214.704 |
| Root d3 | 209.421 | 210.085 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.19 | 219.9 |
| Pitch | 214.48 | 214.704 |
| Root d3 | 209.552 | 210.085 |
Cutting tap preparation
Pre-drill recommendation: 212 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 216.5 mm. Approximate formation model. Estimated formation: 64.3%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.