M220 × 4 Metric Thread Dimensions
Nominal diameter 220 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 217.402 mm. Basic minor diameter: 215.67 mm. Basic major diameter: 220 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 217.402 | 217.638 |
| Minor | 215.67 | 216.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.06 | Not specified |
| Pitch | 217.462 | 217.762 |
| Minor | 215.73 | 216.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 217.402 | 217.702 |
| Minor | 215.67 | 216.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.06 | Not specified |
| Pitch | 217.462 | 217.837 |
| Minor | 215.73 | 216.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 217.402 | 217.777 |
| Minor | 215.67 | 216.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.06 | Not specified |
| Pitch | 217.462 | 217.937 |
| Minor | 215.73 | 216.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 217.402 | 217.877 |
| Minor | 215.67 | 216.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.06 | Not specified |
| Pitch | 217.462 | 218.062 |
| Minor | 215.73 | 216.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 217.402 | 218.002 |
| Minor | 215.67 | 216.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.465 | 219.94 |
| Pitch | 217.062 | 217.342 |
| Root d3 | 214.598 | 215.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.465 | 219.94 |
| Pitch | 217.162 | 217.342 |
| Root d3 | 214.698 | 215.033 |
Cutting tap preparation
Pre-drill recommendation: 216 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 218.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.