M220 × 3 Metric Thread Dimensions
Nominal diameter 220 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 218.051 mm. Basic minor diameter: 216.752 mm. Basic major diameter: 220 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.051 | 218.263 |
| Minor | 216.752 | 217.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.048 | Not specified |
| Pitch | 218.099 | 218.364 |
| Minor | 216.8 | 217.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.051 | 218.316 |
| Minor | 216.752 | 217.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.048 | Not specified |
| Pitch | 218.099 | 218.434 |
| Minor | 216.8 | 217.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.051 | 218.386 |
| Minor | 216.752 | 217.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.048 | Not specified |
| Pitch | 218.099 | 218.524 |
| Minor | 216.8 | 217.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.051 | 218.476 |
| Minor | 216.752 | 217.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.048 | Not specified |
| Pitch | 218.099 | 218.629 |
| Minor | 216.8 | 217.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.051 | 218.581 |
| Minor | 216.752 | 217.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.577 | 219.952 |
| Pitch | 217.753 | 218.003 |
| Root d3 | 215.905 | 216.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.577 | 219.952 |
| Pitch | 217.843 | 218.003 |
| Root d3 | 215.995 | 216.271 |
Cutting tap preparation
Pre-drill recommendation: 217 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 218.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.