M220 × 2 Metric Thread Dimensions
Nominal diameter 220 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 218.701 mm. Basic minor diameter: 217.835 mm. Basic major diameter: 220 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.701 | 218.881 |
| Minor | 217.835 | 218.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.038 | Not specified |
| Pitch | 218.739 | 218.963 |
| Minor | 217.873 | 218.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.701 | 218.925 |
| Minor | 217.835 | 218.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.038 | Not specified |
| Pitch | 218.739 | 219.019 |
| Minor | 217.873 | 218.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.701 | 218.981 |
| Minor | 217.835 | 218.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.038 | Not specified |
| Pitch | 218.739 | 219.094 |
| Minor | 217.873 | 218.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.701 | 219.056 |
| Minor | 217.835 | 218.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220.038 | Not specified |
| Pitch | 218.739 | 219.189 |
| Minor | 217.873 | 218.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 220 | Not specified |
| Pitch | 218.701 | 219.151 |
| Minor | 217.835 | 218.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.682 | 219.962 |
| Pitch | 218.451 | 218.663 |
| Root d3 | 217.219 | 217.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 219.682 | 219.962 |
| Pitch | 218.531 | 218.663 |
| Root d3 | 217.299 | 217.508 |
Cutting tap preparation
Pre-drill recommendation: 218 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 219.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.