M195 × 6 Metric Thread Dimensions
Nominal diameter 195 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 191.103 mm. Basic minor diameter: 188.505 mm. Basic major diameter: 195 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 191.103 | 191.368 |
| Minor | 188.505 | 189.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.08 | Not specified |
| Pitch | 191.183 | 191.518 |
| Minor | 188.585 | 189.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 191.103 | 191.438 |
| Minor | 188.505 | 189.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.08 | Not specified |
| Pitch | 191.183 | 191.608 |
| Minor | 188.585 | 189.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 191.103 | 191.528 |
| Minor | 188.505 | 189.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.08 | Not specified |
| Pitch | 191.183 | 191.713 |
| Minor | 188.585 | 189.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 191.103 | 191.633 |
| Minor | 188.505 | 189.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.08 | Not specified |
| Pitch | 191.183 | 191.853 |
| Minor | 188.585 | 189.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 191.103 | 191.773 |
| Minor | 188.505 | 189.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.32 | 194.92 |
| Pitch | 190.708 | 191.023 |
| Root d3 | 187.012 | 187.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.32 | 194.92 |
| Pitch | 190.823 | 191.023 |
| Root d3 | 187.127 | 187.559 |
Cutting tap preparation
Pre-drill recommendation: 189 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 192.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.