M195 × 2 Metric Thread Dimensions
Nominal diameter 195 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 193.701 mm. Basic minor diameter: 192.835 mm. Basic major diameter: 195 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.701 | 193.881 |
| Minor | 192.835 | 193.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.038 | Not specified |
| Pitch | 193.739 | 193.963 |
| Minor | 192.873 | 193.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.701 | 193.925 |
| Minor | 192.835 | 193.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.038 | Not specified |
| Pitch | 193.739 | 194.019 |
| Minor | 192.873 | 193.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.701 | 193.981 |
| Minor | 192.835 | 193.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.038 | Not specified |
| Pitch | 193.739 | 194.094 |
| Minor | 192.873 | 193.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.701 | 194.056 |
| Minor | 192.835 | 193.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.038 | Not specified |
| Pitch | 193.739 | 194.189 |
| Minor | 192.873 | 193.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.701 | 194.151 |
| Minor | 192.835 | 193.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.682 | 194.962 |
| Pitch | 193.451 | 193.663 |
| Root d3 | 192.219 | 192.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.682 | 194.962 |
| Pitch | 193.531 | 193.663 |
| Root d3 | 192.299 | 192.508 |
Cutting tap preparation
Pre-drill recommendation: 193 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 194.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.