M195 × 4 Metric Thread Dimensions
Nominal diameter 195 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 192.402 mm. Basic minor diameter: 190.67 mm. Basic major diameter: 195 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 192.402 | 192.638 |
| Minor | 190.67 | 191.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.06 | Not specified |
| Pitch | 192.462 | 192.762 |
| Minor | 190.73 | 191.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 192.402 | 192.702 |
| Minor | 190.67 | 191.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.06 | Not specified |
| Pitch | 192.462 | 192.837 |
| Minor | 190.73 | 191.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 192.402 | 192.777 |
| Minor | 190.67 | 191.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.06 | Not specified |
| Pitch | 192.462 | 192.937 |
| Minor | 190.73 | 191.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 192.402 | 192.877 |
| Minor | 190.67 | 191.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.06 | Not specified |
| Pitch | 192.462 | 193.062 |
| Minor | 190.73 | 191.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 192.402 | 193.002 |
| Minor | 190.67 | 191.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.465 | 194.94 |
| Pitch | 192.062 | 192.342 |
| Root d3 | 189.598 | 190.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.465 | 194.94 |
| Pitch | 192.162 | 192.342 |
| Root d3 | 189.698 | 190.033 |
Cutting tap preparation
Pre-drill recommendation: 191 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 193.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.