M195 × 3 Metric Thread Dimensions
Nominal diameter 195 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 193.051 mm. Basic minor diameter: 191.752 mm. Basic major diameter: 195 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.051 | 193.263 |
| Minor | 191.752 | 192.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.048 | Not specified |
| Pitch | 193.099 | 193.364 |
| Minor | 191.8 | 192.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.051 | 193.316 |
| Minor | 191.752 | 192.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.048 | Not specified |
| Pitch | 193.099 | 193.434 |
| Minor | 191.8 | 192.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.051 | 193.386 |
| Minor | 191.752 | 192.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.048 | Not specified |
| Pitch | 193.099 | 193.524 |
| Minor | 191.8 | 192.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.051 | 193.476 |
| Minor | 191.752 | 192.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195.048 | Not specified |
| Pitch | 193.099 | 193.629 |
| Minor | 191.8 | 192.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 195 | Not specified |
| Pitch | 193.051 | 193.581 |
| Minor | 191.752 | 192.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.577 | 194.952 |
| Pitch | 192.753 | 193.003 |
| Root d3 | 190.905 | 191.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 194.577 | 194.952 |
| Pitch | 192.843 | 193.003 |
| Root d3 | 190.995 | 191.271 |
Cutting tap preparation
Pre-drill recommendation: 192 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 193.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.