M185 × 6 Metric Thread Dimensions
Nominal diameter 185 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 181.103 mm. Basic minor diameter: 178.505 mm. Basic major diameter: 185 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 181.103 | 181.368 |
| Minor | 178.505 | 179.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.08 | Not specified |
| Pitch | 181.183 | 181.518 |
| Minor | 178.585 | 179.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 181.103 | 181.438 |
| Minor | 178.505 | 179.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.08 | Not specified |
| Pitch | 181.183 | 181.608 |
| Minor | 178.585 | 179.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 181.103 | 181.528 |
| Minor | 178.505 | 179.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.08 | Not specified |
| Pitch | 181.183 | 181.713 |
| Minor | 178.585 | 179.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 181.103 | 181.633 |
| Minor | 178.505 | 179.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.08 | Not specified |
| Pitch | 181.183 | 181.853 |
| Minor | 178.585 | 179.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 181.103 | 181.773 |
| Minor | 178.505 | 179.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.32 | 184.92 |
| Pitch | 180.708 | 181.023 |
| Root d3 | 177.012 | 177.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.32 | 184.92 |
| Pitch | 180.823 | 181.023 |
| Root d3 | 177.127 | 177.559 |
Cutting tap preparation
Pre-drill recommendation: 179 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 182.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.