M185 × 2 Metric Thread Dimensions
Nominal diameter 185 mm; pitch 2 mm.
Basic geometry
Basic pitch diameter: 183.701 mm. Basic minor diameter: 182.835 mm. Basic major diameter: 185 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.701 | 183.881 |
| Minor | 182.835 | 183.071 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.038 | Not specified |
| Pitch | 183.739 | 183.963 |
| Minor | 182.873 | 183.173 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.701 | 183.925 |
| Minor | 182.835 | 183.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.038 | Not specified |
| Pitch | 183.739 | 184.019 |
| Minor | 182.873 | 183.248 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.701 | 183.981 |
| Minor | 182.835 | 183.21 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.038 | Not specified |
| Pitch | 183.739 | 184.094 |
| Minor | 182.873 | 183.348 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.701 | 184.056 |
| Minor | 182.835 | 183.31 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.038 | Not specified |
| Pitch | 183.739 | 184.189 |
| Minor | 182.873 | 183.473 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.701 | 184.151 |
| Minor | 182.835 | 183.435 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.682 | 184.962 |
| Pitch | 183.451 | 183.663 |
| Root d3 | 182.219 | 182.508 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.682 | 184.962 |
| Pitch | 183.531 | 183.663 |
| Root d3 | 182.299 | 182.508 |
Cutting tap preparation
Pre-drill recommendation: 183 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 184.1 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.