M185 × 4 Metric Thread Dimensions
Nominal diameter 185 mm; pitch 4 mm.
Basic geometry
Basic pitch diameter: 182.402 mm. Basic minor diameter: 180.67 mm. Basic major diameter: 185 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 182.402 | 182.638 |
| Minor | 180.67 | 181.045 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.06 | Not specified |
| Pitch | 182.462 | 182.762 |
| Minor | 180.73 | 181.205 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 182.402 | 182.702 |
| Minor | 180.67 | 181.145 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.06 | Not specified |
| Pitch | 182.462 | 182.837 |
| Minor | 180.73 | 181.33 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 182.402 | 182.777 |
| Minor | 180.67 | 181.27 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.06 | Not specified |
| Pitch | 182.462 | 182.937 |
| Minor | 180.73 | 181.48 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 182.402 | 182.877 |
| Minor | 180.67 | 181.42 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.06 | Not specified |
| Pitch | 182.462 | 183.062 |
| Minor | 180.73 | 181.68 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 182.402 | 183.002 |
| Minor | 180.67 | 181.62 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.465 | 184.94 |
| Pitch | 182.062 | 182.342 |
| Root d3 | 179.598 | 180.033 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.465 | 184.94 |
| Pitch | 182.162 | 182.342 |
| Root d3 | 179.698 | 180.033 |
Cutting tap preparation
Pre-drill recommendation: 181 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 183.2 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.