M185 × 3 Metric Thread Dimensions
Nominal diameter 185 mm; pitch 3 mm.
Basic geometry
Basic pitch diameter: 183.051 mm. Basic minor diameter: 181.752 mm. Basic major diameter: 185 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.051 | 183.263 |
| Minor | 181.752 | 182.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.048 | Not specified |
| Pitch | 183.099 | 183.364 |
| Minor | 181.8 | 182.2 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.051 | 183.316 |
| Minor | 181.752 | 182.152 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.048 | Not specified |
| Pitch | 183.099 | 183.434 |
| Minor | 181.8 | 182.3 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.051 | 183.386 |
| Minor | 181.752 | 182.252 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.048 | Not specified |
| Pitch | 183.099 | 183.524 |
| Minor | 181.8 | 182.43 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.051 | 183.476 |
| Minor | 181.752 | 182.382 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185.048 | Not specified |
| Pitch | 183.099 | 183.629 |
| Minor | 181.8 | 182.6 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 185 | Not specified |
| Pitch | 183.051 | 183.581 |
| Minor | 181.752 | 182.552 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.577 | 184.952 |
| Pitch | 182.753 | 183.003 |
| Root d3 | 180.905 | 181.271 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 184.577 | 184.952 |
| Pitch | 182.843 | 183.003 |
| Root d3 | 180.995 | 181.271 |
Cutting tap preparation
Pre-drill recommendation: 182 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 183.7 mm. Approximate formation model. Estimated formation: 63.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.