M16 × 1.5 Metric Thread Dimensions
Nominal diameter 16 mm; pitch 1.5 mm.
Basic geometry
Basic pitch diameter: 15.026 mm. Basic minor diameter: 14.376 mm. Basic major diameter: 16 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.026 | 15.144 |
| Minor | 14.376 | 14.566 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.032 | Not specified |
| Pitch | 15.058 | 15.208 |
| Minor | 14.408 | 14.644 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.026 | 15.176 |
| Minor | 14.376 | 14.612 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.032 | Not specified |
| Pitch | 15.058 | 15.248 |
| Minor | 14.408 | 14.708 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.026 | 15.216 |
| Minor | 14.376 | 14.676 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.032 | Not specified |
| Pitch | 15.058 | 15.294 |
| Minor | 14.408 | 14.783 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.026 | 15.262 |
| Minor | 14.376 | 14.751 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.032 | Not specified |
| Pitch | 15.058 | 15.358 |
| Minor | 14.408 | 14.883 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.026 | 15.326 |
| Minor | 14.376 | 14.851 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.732 | 15.968 |
| Pitch | 14.854 | 14.994 |
| Root d3 | 13.93 | 14.128 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.732 | 15.968 |
| Pitch | 14.904 | 14.994 |
| Root d3 | 13.98 | 14.128 |
Cutting tap preparation
Pre-drill recommendation: 14.5 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 15.3 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.