M16 × 1 Metric Thread Dimensions
Nominal diameter 16 mm; pitch 1 mm.
Basic geometry
Basic pitch diameter: 15.35 mm. Basic minor diameter: 14.917 mm. Basic major diameter: 16 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.35 | 15.45 |
| Minor | 14.917 | 15.067 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.026 | Not specified |
| Pitch | 15.376 | 15.501 |
| Minor | 14.943 | 15.133 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.35 | 15.475 |
| Minor | 14.917 | 15.107 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.026 | Not specified |
| Pitch | 15.376 | 15.536 |
| Minor | 14.943 | 15.179 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.35 | 15.51 |
| Minor | 14.917 | 15.153 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.026 | Not specified |
| Pitch | 15.376 | 15.576 |
| Minor | 14.943 | 15.243 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.35 | 15.55 |
| Minor | 14.917 | 15.217 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.026 | Not specified |
| Pitch | 15.376 | 15.626 |
| Minor | 14.943 | 15.318 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.35 | 15.6 |
| Minor | 14.917 | 15.292 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.794 | 15.974 |
| Pitch | 15.206 | 15.324 |
| Root d3 | 14.59 | 14.747 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.794 | 15.974 |
| Pitch | 15.249 | 15.324 |
| Root d3 | 14.633 | 14.747 |
Cutting tap preparation
Pre-drill recommendation: 15 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 15.55 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.