M16 × 0.75 Metric Thread Dimensions
Nominal diameter 16 mm; pitch 0.75 mm.
Basic geometry
Basic pitch diameter: 15.513 mm. Basic minor diameter: 15.188 mm. Basic major diameter: 16 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.513 | 15.603 |
| Minor | 15.188 | 15.306 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.022 | Not specified |
| Pitch | 15.535 | 15.647 |
| Minor | 15.21 | 15.36 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.513 | 15.625 |
| Minor | 15.188 | 15.338 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.022 | Not specified |
| Pitch | 15.535 | 15.675 |
| Minor | 15.21 | 15.4 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.513 | 15.653 |
| Minor | 15.188 | 15.378 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.022 | Not specified |
| Pitch | 15.535 | 15.715 |
| Minor | 15.21 | 15.446 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.513 | 15.693 |
| Minor | 15.188 | 15.424 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.838 | 15.978 |
| Pitch | 15.385 | 15.491 |
| Root d3 | 14.923 | 15.058 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.838 | 15.978 |
| Pitch | 15.424 | 15.491 |
| Root d3 | 14.962 | 15.058 |
Cutting tap preparation
Pre-drill recommendation: 15.25 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 15.65 mm. Approximate formation model. Estimated formation: 68.6%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.