M16 × 1.25 Metric Thread Dimensions
Nominal diameter 16 mm; pitch 1.25 mm.
Basic geometry
Basic pitch diameter: 15.188 mm. Basic minor diameter: 14.647 mm. Basic major diameter: 16 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.188 | 15.3 |
| Minor | 14.647 | 14.817 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.028 | Not specified |
| Pitch | 15.216 | 15.356 |
| Minor | 14.675 | 14.887 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.188 | 15.328 |
| Minor | 14.647 | 14.859 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.028 | Not specified |
| Pitch | 15.216 | 15.396 |
| Minor | 14.675 | 14.94 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.188 | 15.368 |
| Minor | 14.647 | 14.912 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.028 | Not specified |
| Pitch | 15.216 | 15.44 |
| Minor | 14.675 | 15.01 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.188 | 15.412 |
| Minor | 14.647 | 14.982 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16.028 | Not specified |
| Pitch | 15.216 | 15.496 |
| Minor | 14.675 | 15.1 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 16 | Not specified |
| Pitch | 15.188 | 15.468 |
| Minor | 14.647 | 15.072 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.76 | 15.972 |
| Pitch | 15.028 | 15.16 |
| Root d3 | 14.258 | 14.438 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 15.76 | 15.972 |
| Pitch | 15.075 | 15.16 |
| Root d3 | 14.305 | 14.438 |
Cutting tap preparation
Pre-drill recommendation: 14.75 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 15.45 mm. Approximate formation model. Estimated formation: 64.7%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.