M155 × 6 Metric Thread Dimensions
Nominal diameter 155 mm; pitch 6 mm.
Basic geometry
Basic pitch diameter: 151.103 mm. Basic minor diameter: 148.505 mm. Basic major diameter: 155 mm.
Internal tolerance limits
Class 4H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 151.103 | 151.353 |
| Minor | 148.505 | 149.005 |
Internal tolerance limits
Class 5G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.08 | Not specified |
| Pitch | 151.183 | 151.498 |
| Minor | 148.585 | 149.215 |
Internal tolerance limits
Class 5H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 151.103 | 151.418 |
| Minor | 148.505 | 149.135 |
Internal tolerance limits
Class 6G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.08 | Not specified |
| Pitch | 151.183 | 151.583 |
| Minor | 148.585 | 149.385 |
Internal tolerance limits
Class 6H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 151.103 | 151.503 |
| Minor | 148.505 | 149.305 |
Internal tolerance limits
Class 7G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.08 | Not specified |
| Pitch | 151.183 | 151.683 |
| Minor | 148.585 | 149.585 |
Internal tolerance limits
Class 7H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 151.103 | 151.603 |
| Minor | 148.505 | 149.505 |
Internal tolerance limits
Class 8G. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155.08 | Not specified |
| Pitch | 151.183 | 151.813 |
| Minor | 148.585 | 149.835 |
Internal tolerance limits
Class 8H. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 155 | Not specified |
| Pitch | 151.103 | 151.733 |
| Minor | 148.505 | 149.755 |
External tolerance limits
Class 6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.32 | 154.92 |
| Pitch | 150.723 | 151.023 |
| Root d3 | 147.027 | 147.559 |
External tolerance limits
Class 4g6g. Values in mm; finished-thread limits are distinct from pre-drill dimensions.
| Diameter | Minimum (mm) | Maximum (mm) |
|---|---|---|
| Major | 154.32 | 154.92 |
| Pitch | 150.833 | 151.023 |
| Root d3 | 147.137 | 147.559 |
Cutting tap preparation
Pre-drill recommendation: 149 mm. Calculated D − P estimate. Finished-thread D1 limits are not pre-drill hole limits.
Forming tap preparation
Pre-drill recommendation: 152.3 mm. Approximate formation model. Estimated formation: 66.2%. This is not a guaranteed manufacturing tolerance.
Thread milling
Use the thread geometry and tolerance limits above to plan the operation. The calculator does not provide an independent thread-milling pre-hole recommendation or a CNC compensation command.